Flipsky Brushless 7070 Motor 110KV 4200W for Surfing Boat Underwater Thruster |Hydro | Efoil
Regular price
$172.00Sale price$137.60
-26 in stock
Spec:
Max power : 4200W
Motor KV:110KV
Max Current: 100A
Rated current:45A
Voltage:6-20S
Max torque : 9.5 N.M
Rated torque:3.8 N.M
Weight:1.08KG
Resistance(R): 64.5mΩ
Motor structure: 12N/14P
Diameter *Length (mm): 70*70
Shaft (mm): 10mm Round Shaft
Bullet Connector: 4mm
Drawing:
Flipsky Dual 75100 With Aluminum PCB Based on VESC For Electric Skateboard / Scooter / Ebike Speed Controller
Regular price
$216.00Sale price$172.80
-145 in stock
Warm tips:
It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
Please be careful to limit the Absolute Maximum Current below 250A,setting page
Specs:
Dual 75100 Size:L107mm*W103mm*H18.5mm
Voltage:14-84V (4-20S safe)
Current:continuous max 100A single,dual continuous max 200A,values depend on the mounting and ambient temperature around the device!
BEC:5V@1A
Support BLDC square wave mode control and FOC sine wave mode
Firmware: latest (firmware update supported)
ERPM:150000
Control Interface Ports:USB,CAN,UART
Supported Sensors:ABI,HALL,AS5047,AS5048A
Input Set Support:PPM,ADC,NRF,UART
Wire Size: 12AWG
Phase filter: No
Programmable: Yes
Regenerative Capacity: Yes
Warm tips:
Phase filering is not available for Flipsky ESC75100 and 75200! Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface. Here below video and blog links FYI. YouTube:Click here Blog:Click here
Detail:
Wiring diagram:
FLIPSKY Dual FSESC6.9 100A base on VESC6.6 With Aluminum Case Heat Sink
Regular price
$220.00Sale price$156.80
-75 in stock
Warm tips:
It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC
Specs:
Firmware: Latest Version
Continuous current: Continuous 100A single, total 200A , Instantaneous current 400A per single, total 800A for system instantaneous current. values depend on the mounting and ambient temperature around the device!
Voltage: 14V-60V(safe for 4S to 12S, voltage spikes may not exceed 60V! )
BEC: 5V@1A,5V/1A output for external electronics
ERPM: 150000
Control Interface Ports:USB,CAN,UART
Supported Sensors:ABI,HALL,AS5047,AS5048A
Input Set Support:PPM, ADC, NRF, UART, SPI, IIC
Modes:DC, BLDC, FOC (sinusoidal)
Regenerative capacity: Yes
Programmable: Yes
Motor wire: 10AWG
Power cable:8AWG
Size:127.6x78.4x32.5mm(Including Alu case)
Dual FSESC4.20 Plus (Based on VESC ) with Anodized Aluminum Heatsink
Regular price
$150.00Sale price$120.00
-709 in stock
Warm tips:
It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
please do not remove the shrink to protect the pcb electronics components from impurites or metals which result in short circuit or esc burnt damage.
Dual FSESC4.20 Plus(Pro Switch) base on VESC, it’s upgraded on